INSTALLATION MANUAL
–
RAVAS-
SafeLoad
13
5.3. Mechanics: installing the moment force sensors
The moment force sensors should be placed in line with the tilting cilinder of the forklift truck.
This can be either inside or outside the truck, wherever it will fit best, just as long as they are
in line with the tilting cilinders. See examples of mounting positions underneath.
The moment force sensors consist of parts:
2 moment force sensors with 2 meters cable length, to be installed in the line of the tilting cylinders
for the mast (fixed part)
2 protection caps, to be installed over the force sensors
1 junction box, to be installed at a suitable place in the truck.
For mounting the force sensors you may drill holes or use stud welds.
