www.ravas.com
25
Or
Press the key.
Press the
key to go up a value or press the
key to go down a value until the
required value is reached.
Press
to change to the next digit.
Repeat this procedure until the required value is displayed.
Press
to accept the new value.
The set-point value is activated and the display returns to the weighing mode.
The display shows “tare” and the indicator automatically tares out the scale
after the scale has been stable for a few seconds.
Attention: be sure the container is already in place at this moment!
Filling & Dosing:
The display shows the net value and the pointers stp1 and stp2 are on.
Relays 1 and 2 are closed.
As soon as set-point 1 is reached, pointer stp1 will turn off and relay 1 will be
opened.
As soon as set-point 2 is reached, pointer stp2 will turn off and relay 2 will be
opened.
The display shows “done” for a few seconds and will return in the normal
weighing mode.
The net weight is displayed. A printout may be made at this point.
It is possible to cancel the filling or dosing procedure at any time by pressing the CE
key (see below).
The printout will show the following:
-
The gross weight is the weight of the container with rest material.
-
The tare weight is the weight of the container with material before dosing.
-
The net weight will show a minus sign as token of weight being removed from the
scale.
CANCEL DOSING / FILLING
It is possible to cancel the filling or dosing procedure at any time by pressing the CE
key.
Press the CE key to stop the procedure.
The display shows “stop” and the relays are opened. Pointers stp1 and stp2
will be turned off.
Press ENTER to start the procedure again.
The display sign “stop” is cleared and the net weight is displayed again.
The relays are closed. Pointers stp1 and/or stp2 will be turned on.
Or
Press the CE key to stop the procedure.
The display shows “done” for a few seconds and will return in the normal
weighing mode.
The net weight is displayed.
