Ravas iJack-40, Руководство пользователя

Страница: 23 / 34

www.ravas.com
23
In this setting set-point 1 is activated as soon as the gross or net value exceeds the
set-point value. In this case the set-point value is an absolute value.
To enter a new value:

Press the key.

The display shows the last entered value with the left digit blinking. The pointer
for set-point 1 is on.

Press

to accept the old value.

The set-point value is activated and the display returns to the weighing mode.
Or

Press the key.

Press the

key to go up a value or press the

key to go down a value until the
required value is reached.

Press

to change to the next digit.

Repeat this procedure until the required value is displayed.

Press

to accept the new value.

The set-point value is activated and the display returns to the weighing mode.
DOSING/FILLING with Manual Tare & Start
In this setting set-point 1 and 2 are switched on as soon as the tare key has been
activated and after the set-point values have been entered.
To enter new set-point values:

Press the key.

The display shows the last entered value with the left digit blinking. The pointer
for set-point 1 is on.

Press

to accept the old value.

The value for set-point 1 is activated. The display shows the last entered value
for set-point 2 with the left digit blinking. The pointer for set-point 2 is on.
Or

Press the key.

Press the

key to go up a value or press the

key to go down a value until the
required value is reached.

Press

to change to the next digit.

Repeat this procedure until the required value is displayed.

Press

to accept the new value.

The set-point value is activated and the display returns to the weighing mode.

The display shows “tare”.