GB
Page 14 of 32
INSTRUCTION, USE AND
MAINTENANCE MANUAL
G1150.30MAGIC - G1150.30MAGICIT
RAVAGLIOLI S.p.A.
7107-M001-0_R
Fig. 13
11.2 Pedalboard (see Fig. 14)
“Pedal A”
has two maintained type operative positions.
When it is pushed downwards it controls the chuck
motor clockwise rotary movement. When the pedal is
lifted upwards it operates the opposite movement.
NOTE:
the chuck unit speed can be continously adjusted
up to the maximum speed through a progressive
pressure on the pedal, only in clockwise direc-
tion.
“Pedal B”
has a different function according to the the
version present on the machine.
Version with inflation with pressure gauge
The inflation pedal in this version has only one func-
tion. A continuous pressure supplies air at a controlled
pressure (max 4 ± 0,2 bar 58 PSI).
Version with tubeless inflation
11.0 CONTROLS
11.1 Control device
This unit has two buttons with different functions posi-
tioned on a single control unit (
Fig. 13 pos. 3
).
The two pneumatic buttons on the control operate the
vertical movement of the bead breaking roller arm (
Fig.
13 pos. 1
) and of the tool arm (
Fig. 13 pos. 2
).
The vertical control unit is also equipped with a
pushbutton for the control of bead breaking roll (
Fig.
13 pos. 4
) forward movement.
•
Lever “
A
”
for the tool setting on the wheel diameter,
through a thrust and return movement and together
with “
B
” unlocking push button.
•
Lever “
C
”
for bead breaker roller setting on the wheel
diameter, through a thrust and return movement and
together with “
D
” unlocking push button.
•
Unlocking push button “
B
”
,
pushed before lever “
A
”
starting for the tool positioning. Releasing the push
button, the tool locks itself into the set position.
•
Unlocking push button “
D
”
pushed before lever “
C
”
starting for bead breaker roller positioning. Releasing
the push button, the roll locks itself into the set posi-
tion.
ATTENTION: “
B
” and “
D
” push buttons must be pushed
before starting the corresponding “
A
” and “
D
” levers;
oth-
erwise, the levers do not allow any movement.
The inflation pedal has two functions. The supply of air
at a controlled pressure as in the previous version, and
a second function of a jet of air from the inflation nozzle
to assist the beading in of the tyre.
Version with lateral bead breaker
DO NOT CHANGE THE SET OPERAT-
ING PRESSURE VALUE BY MEANS
OF THE MAXIMUM PRESSURE
VALVES. THE MANUFACTURER
SHALL NOT BE RESPONSIBLE FOR
INJURY OR DAMAGE ARISING
FROM UNAUTHORISED CHANGES.
DO NOT CHANGE THE SET OPERAT-
ING PRESSURE VALUE BY MEANS
OF THE MAXIMUM PRESSURE
VALVES. THE MANUFACTURER
SHALL NOT BE RESPONSIBLE FOR
INJURY OR DAMAGE ARISING
FROM UNAUTHORISED CHANGES.
