GB
Page 18 of 32
INSTRUCTION, USE AND
MAINTENANCE MANUAL
G1150.30MAGIC - G1150.30MAGICIT
RAVAGLIOLI S.p.A.
7107-M001-0_R
Fig. 27
4. After the upper bead breaking, release the the roll
from the rim releasing the pushbutton (
Fig. 13 Pos.
4
) and operating the pushbutton (
Fig. 13 Pos. 1
).
5. Operate the lever (
Fig. 28 Pos. 1
) in order to let the
bead breaking roller arm (
Fig. 28 Pos. 2
) open and
go under the rim without changing its previously set
position.
Fig. 26
3. Keep on approaching,
activating the wheel rotation
in clockwise sense (see
Fig. 26
) pushing the pedal
(
Fig. 14 Pos. A
) and at the same time push the but-
ton (
Fig. 13 Pos. 4
), keeping it pressed until the bead
breaking roller is inserted in the rim. Keep on with
the wheel rotation until the operation is completed
(see
Fig. 27
).
Fig. 25
ALWAYS VERIFY THAT THE ARM IS
HOOKED.
USE VERY CAREFULLY THE VERTI-
CAL BEAD BREAKING ROLLER IN
ORDER TO AVOID POSSIBLE
HANDS CRUSHINGS.
Approach the bead breaking roller (
Fig. 25 Pos. 2
)
to the rim edge (
Fig. 25 Pos. 1
), pressing the
pushbutton (
Fig. 13 Pos. 1
).
2. Define roll position on the rim diameter through the
lever (
Fig. 25 Pos. 3
) after the arms have been un-
locked with the push button (
Fig. 25 Pos. 4
) posi-
tioned on the lever itself.
THE BEADING DISC MUST EXERT
PRESSURE ON THE TYRE BEAD
BUT NEVER ON THE RIM.
USE VERY CAREFULLY THE VERTI-
CAL BEAD BREAKING ROLLER IN
ORDER TO AVOID POSSIBLE
HANDS CRUSHINGS.
