GB
Page 10 of 32
INSTRUCTION, USE AND
MAINTENANCE MANUAL
G1150.30MAGIC - G1150.30MAGICIT
RAVAGLIOLI S.p.A.
7107-M001-0_R
10.0 ASSEMBLY AND PREPARATION
FOR USE
After having freed the various components from the pack-
ing check that they are complete, and that there are no
anomalies, then comply with the following instructions
for the assembly of the components making use of the
attached series of illustrations.
10.1 Accessories contained in the packing
The packing case contains also the accessory box.
Check that all the parts listed are there.
N.
1
1
1
1
1
1
1
1
1
B1157000
710013421
G1000A67
790011620
790011640
710090223
710012940
710090480
B0223000
TWO-FACED CONE
REVERSE WHEELS PROTECTION
28’’ BEAD DEPRESSING W/ENTRAINER
BEAD SLIDING FOIL
INSTRUCTIONS FOR BEAD SLIDING FOIL
RAPID COUPLING
PIN EXTENSION
GUARD WITH OR
GREASE HOLDING RING
Fig. 7
10.2 Assembly procedure
1. Mount the ring (# B0223000)
(Fig. 7 pos. 1)
in the
accessory box, using the 2 provided screws already
present on machine body
(Fig. 7 pos. 2)
.
The holes in the solid floor must be about 10 cm deep
with a diameter of 8 mm.
The bolts (
Fig. 6 pos. 1
) must be inserted in the holes
and fully tightened.
Fig. 6
a
=621 mm
b
=440 mm
The location of the machine requires a usable space of
3250x2750, mm (as indicated in
Fig. 5
).
The positioning of the machine must be according to the
distances shown. From the control position the opera-
tor is able to observe all the machine and surrounding
area. He must prevent unauthorized personnel or ob-
jects that could be dangerous from entering the area.
The machine must be fixed on a flat floor surface, pref-
erably of cement or tiled.
Avoid un-solid or irregular surfaces.
The base floor must be able to support the loads trans-
mitted during operation.
This surface must have a strength of at least 500 kg/m
2
.
The thickness of the solid floor must be sufficient to
guarantee that the anchoring bolts hold.
9.0
ANCHORING SYSTEM
The packed machine is fixed to a pallet by support feet.
Such feet also fix the machine to the ground through
anchor small blocks as shown in
Fig. 6
.
Code
Description
