Rauch AXIS-M 30.2, Инструкция по эксплуатации

Страница: 126 / 148

Maintenance and service 10
118
10.6.2 Dismounting the dirt deflector
1. Move the dirt deflector laterally to the inside until it latches in the bracket.
2. Screw the 3 quick release closures on the left- and the right-hand dirt deflec-
tor together with the adjustment lever of the machine.
3. Put the adjustment lever back into the specified bracket.
10.7 Checking the position of the spreading disc hub
The spreading disc hub must be centred exactly under the agitator.
Figure 10.12: Checking the position of the spreading disc hub
Requirements:

The spreading discs are removed (see “Dismounting spreading discs” sub-
section).
Testing the centring:
1.
Use suitable equipment to check that the spreading disc hub and agitator are
centred (e.g. straight edge ruler, protractor)

The axes of the spreading disc hub and of the agitator must be aligned.
They may deviate from each other by a maximum of
2 mm .
If this tolerance is exceeded, please contact your dealer or authorised specialist
workshop.
Checking the distance:
2.
Measure the gap between the upper edge of the spreading disc hub and the
lower edge of the agitator.
 The distance must amount to 136.5 mm (admissible tolerance ± 2 mm).
If this tolerance is exceeded, please contact your dealer or authorised specialist
workshop.
136,5
_ + 2 mm
< 2 mm