Rauch AXIS-M 30.2, Инструкция по эксплуатации

Страница: 97 / 148

Spreading operation
89
8
Driving out of the headlands tramline

Open the metering slides if the following requirement is met:
- The end of the spreading fan on the field [E] is at approx. half of the wor-
king width + 4 to 8 m from the field boundary of the headlands.
The tractor is then located at different distances in the field, depending on the
spreading distance of the fertiliser.
Driving into the headlands tramline

Close the metering slides as late as possible .
- The end of the spreading fan should ideally lie on the field [A] at a distance
of approx.4 to 8 m further than the working width [X] of the headlands.
- This cannot always be achieved, depending on the spreading distance of
the fertiliser and the working width.

Alternatively, drive beyond the headlands tramline, or lay out a 2nd head-
lands tramline.
Follow these instructions in order to ensure an environmentally friendly and eco-
nomical working method.
8.9 Spreading with section control (VariSpread)
With the spreading width assistant VariSpread, you can reduce the spreading
width and the application rate on each side. You can spread on wedge-shaped
fields with high precision.
NOTICE
Some models are not available in all countries.
Version VariSpread V2 VariSpread V4 VariSpread Dynamic
QUANTRON-A QUANTRON-A
or ISOBUS
1 section
on each side
2 sections
on each side
continuous
section control
K,D,R,C

Q, W

EMC (+ W)
 