Commissioning
7
48
Figure 7.5:
Set the adjustment screw at the hydraulic block for LS
5.
Connect the ISOBUS connector plug [4] to the ISOBUS coupler socket at the
rear of the tractor.
6.
Connect the lighting cable [5].
7.
From the tractor cab, connect the lower link hooks and the upper link to the des-
ignated coupling points; please refer to the operator’s manual of the tractor.
8.
Check the tight seat of the machine.
9.
Carefully raise the machine to the desired lifting height.
10.
Preset the mounting height according to the fertiliser chart. See
7.7.2: Settings as per fertiliser chart, page 59
NOTICE
The machines of the AXIS H EMC series are equipped with an electronic meter-
ing slide actuator.
The metering slide actuator is described in a separate operator's manual of the
electronic control unit. This operator's manual is an integral part of the electronic
control unit.
NOTICE
We recommend using lower link hooks together with a hydraulic upper link for
safety and comfort. See
Содержание AXIS H EMC Series
