Intended use and declaration of conformity
1
1
1
Intended use and declaration of conformity
1.1
Intended use
Use the mineral fertiliser spreaders of the AXIS H EMC series only in accordance
with the stipulations of the present operator's manual.
The mineral fertiliser spreaders of the AXIS H EMC series are constructed in ac-
cordance with their intended use.
They may only be used for the application of dry, granular and crystalline
fertilisers, seeds and slug pellets.
Any use beyond these specifications is considered as contrary to the intended
use. The manufacturer shall not assume any liability for any damages resulting in
this respect. The risk is solely carried by the operator.
The intended use also comprises the compliance with the operating, mainte-
nance and repair conditions prescribed by the manufacturer. Original spare parts
by the manufacturer may be used exclusively for replacement purposes.
The mineral fertiliser spreaders of the AXIS H EMC series may only be used,
maintained and repaired by people who are familiar with the characteristics of the
machine and who are aware of the risks.
The instructions regarding the operation, service and safe handling of the ma-
chine as described in this operator's manual and declared by the manufacturer in
the form of warning signs and symbols on the machine must be strictly followed
during operation.
Moreover, the relevant accident prevention regulations and the other generally
recognised safety, occupational health, and road traffic regulations must be strict-
ly observed when using the machine.
Any unauthorised modifications to the mineral fertiliser spreader of the
AXIS H EMC series are inadmissible. Such modifications exclude any liability of
the manufacturer for any resulting damages.
In the following chapters, the mineral fertiliser spreader is referred to as "
ma-
chine
“.
Foreseeable misuse
With the warning notes and pictorial warnings attached to the mineral fertiliser
spreader of the AXIS H EMC series, the manufacturer points out foreseeable
misuse. Observe these warning notes and pictorial warnings in order to avoid us-
ing the mineral fertiliser spreader of the AXIS H EMC series in a way that contra-
dicts the intentions of the operator's manual.
Содержание AXIS H EMC Series
