background image

4101 Garland Drive, Fort Worth, TX 76117

Phone 817.485.6073 Fax 817.428.6008

www.starindustries.com

Forklift

Spreader Bar

Operator’s Manual

for Model 1150C

RATED LOAD CAPACITY

Empty Weight - 5

4

5

 

lbs.

Center Hook used alone

6,000 lbs.

At 8 feet wide

8,000 lbs.

Extended to 10 feet wide 6,400 lbs.
Extended to 12 feet wide 5,000 lbs.

BEFORE USE, READ AND UNDERSTAND THE

COMPLETE OPERATOR’S MANUAL.

If you need clarification or any additional information call

your Star dealer or call Star Industries @ 1-800-541-1797

during normal business hours.

Installation, Use & Safety Precautions

The model 1150C Extendable Spreader Bar is 

designed for use with a rough terrain forklift of 

adequate capacity to safely handle the load. The 

Spreader Bar extends from 8 feet to 10 feet to 12 

feet and comes equipped with fork pockets that 

will accept up to 7” wide X 3” thick forks. Be aware 

that the information contained in this manual is 

intended as a guide and does not replace the need 

for the user to know, understand, and observe all 

applicable company, local, state, and federal safety 

codes and or requirements. The model 1150C 

meets/exceeds the requirements of ASME B30.20-

2006 and is classified as Category A and Service 

Class 0 as defined in ASME BTH-1-2005.

DANGER - DO NOT USE WITHOUT INSTALLING

RETAINING PINS behind the heel of each fork and

securing with hair pins or cotter pins

Safety chain(s) must also be used. Wrap chain 

around a strong part of the fork carriage and secure 

with locking grab hook.

BEFORE USE, READ 

AND UNDERST

AND 

THE COMPLETE OPERA

TOR’S MANUAL.

If you need clarification or any additional information call your Star dealer or call

Star Industries @ 1-800-541-1797 during normal business hours.

Customers Who Bought this product also bought

Lift Hooks -

Lift up to 22,000 lbs

Safely and securely

Safety W

ork Platforms -

Turn your forklift into an

Aerial work platform

Concrete Hoppers -

Turns your forklift into

A concrete placer

.

Visit www

.starindustries.com or call us at 800-541-1797 for more information on these and other great products.

Содержание 1150C

Страница 1: ...nded as a guide and does not replace the need for the user to know understand and observe all applicable company local state and federal safety codes and or requirements The model 1150C meets exceeds the requirements of ASME B30 20 2006 and is classified as Category A and Service Class 0 as defined in ASME BTH 1 2005 DANGER DO NOT USE WITHOUT INSTALLING RETAINING PINS behind the heel of each fork ...

Страница 2: ...estimate will be required prior to authorization Reimbursement will be at the current Star Warranty Labor Rate and will not include reimbursement for off site travel A Warranty Claim Form must be submitted within 45 days of warranty repair authorization to receive credit for repair A return authorization number must be obtained from Star Industries before a product can be returned for inspection a...

Страница 3: ...ide and secure them with hair pins to lock the spreader bar to the forks Then secure the safety chains to a strong part of the forklift carriage making sure the chains are not slack and installed as close to a straight horizontal pull as possible The chain angle must not exceed 45 degrees vertical Adjust the width Adjust the spreader bar to the desired width by removing the adjustment pins and sli...

Страница 4: ... that it is equally balanced and hangs level 4 When lifting a load guard against shock loading by taking up the slack in slings or straps slowly 5 Prevent jerking at the beginning of the lift and accelerate or decelerate slowly 6 Do not use the spreader bar to drag or pull a load 7 Do not leave suspended loads unattended 8 Take care that the load does not swing or come in contact with an obstructi...

Отзывы: