Original instructions
TROUBLE SHOOTING
Malfunction status
Cause
Action
Battery cartridge is not installed.
Install the battery cartridge.
Battery problem (under voltage)
Recharge the battery. If recharging
Motor does not run.
is not effective, replace battery.
The drive system does not work
Ask your local authorized service
correctly.
center for repair.
Motor stops in a while after
Battery is nearly flat.
Recharge the battery. If recharging
start.
is not effective, replace battery.
Overheating.
Rest the equipment for a while.
Battery is installed improperly.
Install the battery cartridge as
Revolution does not achieve
described in this manual.
the appropriate speed.
Battery power is dropping.
Recharge the battery. If recharging
is not effective, replace battery.
The drive system does
Ask your local authorized service
not work correctly.
center for repair.
Foreign object such as a branch is
Cutting tool does not rotate:
jamming between the guard and
Remove the foreign object.
stop the machine immediately!
the cutting tool.
The drive system does not
Ask your local authorized service
work correctly.
center for repair.
One end of the nylon cord has
Bump the nylon cutting head
Abnormal vibration:
been broken.
against the ground during driving
stop the machine immediately!
the equipment to feed the cord.
The cutter blade is bended,
Replace the cutter.
cracked or worn
The drive system does not work
Ask your local authorized service
correctly.
center for repair.
Cutting tool and motor cannot
Electric or electronic malfunction. Remove the battery and ask your
stop:
local authorized service center for
Remove the battery
repair.
immediately!
22-English
