Original instructions
ASSEMBLY
Fitting the Cutting blade
(see Fig.11-12)
•
Be sure to use genuine Rato cutting blade .Turn the tool upside down so that you can replace the cutter blade
easily.
HEX NUT
CUP
CLAMP WASHER
CUTTER BLADE
RECEIVE WASHER
MOTOR HOUSING
Fig.11
To dismount the cutter blade, insert the hex wrench through the hole on the motor housing and receive washer.
rotate the receive washer until it is locked with the hex wrench. Loosen the hex nut (left-hand thread)with the hex
socket wrench and remove the nut, cup, clamp washer and hex wrench.
SPANNER
HEX WRENCH
Fig.12
Mount the cutter blade onto the shaft so that the guide of the receive washer fits in the arbor hole in the cutter
blade . Install the clamp washer, cup, and secure the cutter blade with the hex nut with 13 to 23Nm of tightening
torque during holding the receive washer with hex wrench. Then tighten the one nut by clockwise rotate.
17-English
