Rato R80, Руководство по обслуживанию, Страница: 44 / 79

Part IV Disassembly and Maintenance
40
4-4-2 Flywheel
a) Disassembly: fuel tank; air filter; carburetor; starter assembly.
b) Use a thickness gauge to measure the clearance between ignition coil and flywheel.
c) Adjustment: clearance between ignition coil and flywheel.
d) Adjustment steps: loosen the bolts, adjust clearance by moving the ignition coil up and
down, and tighten the bolts
Flywheel nut
Starter cup
Impeller
Flywheel
Bolt
Ignition coil
Spark plug
cap
HV ignition wire
(Inspect the insulator
for cracks or damage
and replace if
necessary)
Blow-out
line
Ignition coil
Flywheel
Ignition clearance:
0.4-0.6mm