Rato R80, Руководство по обслуживанию, Страница: 34 / 79

Part IV Disassembly and Maintenance
30
normal if it is not conductive between wires.
3) When turning off the gasoline engine, drain off the oil, disconnect the oil level switch wire,
and check the conductivity between yellow and green wires. It is normal if it is conductive
between wires.
4-1-8 Overheating of general-purpose gasoline engine
Phenomenon Cause Remedy
Gasoline engine
overheating
Insufficient oil Fill sufficient oil
Exhaust port is blocked Clean exhaust port
Leakage of air director Repair damaged place
Sundries blockage in the middle of cooling fins Clean cooling fins
Deformation of connecting rod causes the wears
of the piston and cylinder liner edge
Replace the connecting rod
Wears of cylinder, piston and piston ring causes
air leakage between cylinder and crankcase
Replace worn parts
Gasoline engine governor is improperly
adjusted, causing the speed to be too high
Re-adjust the governor
Crankshaft main bearing burning Replace the main bearing
Yellow wire (gasoline
engine switch)
Yellow wire
(oil level switch)
Green wire
(ground wire)