Rato R80, Руководство по обслуживанию, Страница: 41 / 79

Part IV Disassembly and Maintenance
37
4-4 Gasoline engine (electric starting type is taken as an example in the following figure.
manual starting type is installed with different parts, and disassembled in a similar manner)
Disassembly and assembly
Control box (only for automatic
starter specification)
Wire holder (2)
Installation: inserted into
the fan guard.
Wire of ignition coil (black)
Wire of automatic starter
relay
White wire
Wire of oil level switch
(yellow)
Wire of oil level switch
(green) (connected to the
side plate)
Charging coil wire (white)
Black/red wire
wire connected to
the ignition coil
Yellow wire
yellow wire connected to the
oil level switch
Gray wire
wire connected to
the charging coil
Fan guard (only for automatic
starter specification)
Disassembly and assembly:
Can be installed and disassembled
when the impact starter is assembled.
Black/white wire
wire connected to the
automatic starter
Yellow wire (wire
connected to the
oil level switch)
Fan guard (only for impact
starter specification)
Gasoline engine switch
(models with the oil alarm
device)
Black wire (wire
connected to the
ignition coil)
Black wire
(wire connected
to the ignition
coil)
Gasoline engine switch
Disassembly:
Use a screwdriver
to remove the jaw.
● Wire bundling method (only for models with
automatic starter): After connecting wires, use
zipper sheath, cable band, pipeline fixing clamp,
etc. to fix them according to the method shown in
the figure below.
Cable band
Pipeline fixing
clamp
Zipper
sheath