Rational SelfCookingCenter whitefficiency, Руководство по обучению

Страница: 53 / 76

- 53 - V02 en, SCC_WE
Software version from 05-00-07:
In case the unit shall be connected as a show room unit
(exhibition), it must be converted prior of starting the self
test.
In the first Sleft test display press Service
Start key
Enter password TECLEVEL
1. Press „ Process abort“ key
(all service keys will show again)
2. Press show mode 10 seconds
3. Switch unit off and on again
In case only diagnostic mode is shown after entering the password the unit was in a running process
prior entering into service level.
Only at this same time the process abort key is shown.
Press process abort key. Now all components of Service Level are shown.
NOTE: Any running process will be terminated automatically!
In case a service error is indicated, e.g. Service 34, the service start key is indicated
at the same time.
The technician can always enter Diagnostic level via the service start key and
password.
Setting Show mode - error analysis
Selfttest
Your SCC will carry out an automatic
self test and adjust itself perfectly to
the set-up conditions and the altitude.
Diagnostic
Basic Settings
Function Test
Calibration
Show mode