Rational SelfCooking Center, Руководство по эксплуатации

Страница: 77 / 84

- 73 -
Before you call customer service
Error Possible cause To eliminate
The unit does not indicate a
function after it is switched
on. External main switch is
switched off.
Fuse on the premises’
distribution board has
tripped.
The ambient temperature
after switching the unit off
remained below 5 °C (41 °F)
for a long time. Switch on at the main switch.
Check the fuses on the premises’ distribution
board.
Heat the cooking cabinet to above 20 °C
(68 °F).
The appliance must only be used in frost-free
conditions (see installation instructions).
Foam forms on the unit at
the top of the outlet pipe
during CleanJet
® cleaning.
The amount of cleaner and
rinse aid tablets was set too
high.
The outlet is not installed
correctly.
Select the number of tablets as specifi ed for
the CleanJet
®
process. Reduce the number
of tablets if a water softener is connected
or if the water is naturally soft (see the
„CleanJet
® “ section of the manual).
Install the outlet as described in the
installation manual.
The run time is suddenly
incremented during a
CleanJet
® process.
The CleanJet ® process is
interrupted.
Make sure that the air baffl e and the grid
shelves are fi xed correctly in the cooking
cabinet. There must be no containers or sheets
in the cooking cabinet during the CleanJet
®
process.
The gas unit indicates
„Change polarity”. The power supply is not
connected with the correct
polarity. If the gas unit is connected to a socket,
remove the connector and turn through 180°.
An electrician can permanently connect the
unit (without a connector) with the correct
polarity.
Gas unit constantly displays
Reset. The gas supply to the unit is
interrupted.
The gas pressure is too low. Open the gas valve.
Switch on the ventilation cover.
Have the gas supply to the unit checked.
Cooking mode button
fl ashing The cooking cabinet is too
hot Use Cool Down to cool the cooking cabinet
(see the “Cool Down” section of the “General
User Instructions” manual).