Rational iCombi Pro, Оригинальная инструкция по эксплуатации

Страница: 55 / 112

10 | iProductionManager
Original instructions for use 55 / 112
1. To place a timer at the current time, first tap the timer on the ticket board, and then select a rack level.
>
The timer will be placed at the current time.
2. To place a timer in the future, drag the timer to the start time and rack level of your choice.
3. To move the timer to a different rack level or change its start time, press and hold the timer.
>
This symbol will be displayed:
4. Drag the timer to the correct position.
5. To increase or decrease timer length, tap the timer briefly,
6. and then either rotate the selection dial or press these buttons: or
>
After a brief waiting period, your new settings will be applied.
>>
When the timer goes off, you will be prompted to unload the cooking system. This symbol will appear beside
the rack level:
. The cooking time is at 00:00.
10.4 Placing tickets
a
You have created manual tickets [ } 52], shopping carts [ } 53] or a ticket board [ } 54].
1. Drag a ticket to the desired rack level.
>
For better orientation, the rack level on which you want to place the ticket is highlighted in blue. The time on
the ticket is also shown as a further aid.
>
If the rack level is marked in yellow or red, you can not place the ticket without moving the tickets that have
already been placed. More information is available here: Combination check [
}
56] and positioning logic
[ } 56]
2. If you have placed multiple tickets, scale the time axis to get an overview. To activate lighting, press this
button:
The following options are available to optimize the positioning of the tickets:
n
Close planning gaps [ } 56]
n
Time optimization [ } 57]
n
Energy optimization [
}
58]
n
Target time cooking [ } 59]
If you position tickets for the actual time, a vertical yellow or blue bar appears:
n
A yellow bar indicates that the cooking cabinet is heating up.
n
A blue bar indicates that the cooking cabinet is being cooled down with the Cool Down function.
n
The width of the bar indicates how long the heating or cooling will take.