17
We reserve the right to check batteries claimed under warranty to ensure they have been
maintained as per our instructions.
5
Extra recommendations and warnings
The importance of use of the original spare parts for parts with critical influence on safety. Battery,
charger, controller, display, motor, front fork, handlebar, stem, seat post, brake system must use the
original parts, not recommended to change by yourself.
5.1.1 It is not recommended to install transportation equipment and child seats.
5.1.2 Recommendation and user responsibility in case of unauthorized manipulation.
Cycling:
1. Always wear a safety helmet when riding a bike. 2. Please follow the traffic rules
for cycling. 3. Please check whether the bicycle is in normal condition before riding. 4. The
tire pressure during inflation must not exceed the rated tyre pressure of the tyre. 5. Downhill
and non-paved roads must not exceed 15KM / H, and do not use the enhanced mode.
Bike storage and maintenance:
1. After the ride, please place the bike in a place free of
sunlight and rain. 2. Always check the chain lubrication, if the chain is free of oil, please add
chain lubricant. 3. Regularly check the various screws of the car and the places that need to
be tightened, and tighten regularly. 4. Clean the bike regularly to ensure the best
performance of the bike.
Charging:
1. Must follow the instructions. 2. Must use original charger. 3. Do not disassemble
or replace the equipment in the charger by yourself.
5.1.3
Emission level of sound pressure on rider ears is lower than 70 DB (A)
5.1.4
Extra warnings:
Like all mechanical components, Epac bicycles are subject to wear and
high stress. Different materials and components can respond to wear or fatigue in
different ways. If the design life has been exceeded, it can suddenly fail and cause
injury to the rider. Any form of cracks, scratches or discoloration in the stressed area
indicates that the service life of the component has been reached and the
component has to be replaced.
1. If there is bifurcation, breakage or rusting on the brake line or shift line, it must be
replaced;
2. When the thickness of the brake pads is less than 0.8-1mm, the film needs to be
replaced;
3. When the tread marks of the outer tire are worn to smooth or cracked or damaged,
they must be replaced. When the inner tire is damaged and cannot be inflated, the
tire must be replaced or replaced;
