Ratek TH8500 Programmable Immersion Heater Circulator - User Manual
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Page 2 of 28
Thank you
Thank you for purchasing a Ratek product.
This User Manual will assist you in the correct installation and operation of the Programmable Immersion Heater Circulator, as well as
explain the safety requirements for its use.
Important: Please read the contents of this User Manual before unpacking and operating the product.
Unpacking and Checking
Once you have read these instructions in full and understand the installation and safety requirements including those for unpacking the
carton, please carefully open the packing and slowly remove the product. Carefully inspect the condition of the product to ensure it has
not been damaged in transit. Any damage should be reported immediately to the responsible carrier. If the product is damaged in any
way, re-pack the product into the supplied packaging and notify the responsible carrier immediately.
Important: Do not operate the equipment if it has been damaged in any way. Any failures resulting through the use of a
damaged product will not be covered by the product warranty.
Carton Contents
Ensure that you have received all items outlined below before proceeding. If you have not received all components in the supplied
carton, please re-pack the carton and notify a Ratek Service representative immediately. Contact details are provided in the section of
this User Manual titled “Ratek Service Contact Information”
-
TH8500 Ratek Programmable Immersion Heater Circulator
-
User Manual
