Ratek TH8500 Programmable Immersion Heater Circulator - User Manual
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Page 9 of 28
CAUTION
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment
may be impaired.
CAUTION
The equipment must only be used with a protective earth power socket. The earth contact provides protection to
the user and the equipment. If you do not have a protective earth power socket, or you are unsure as to whether
you have a protective earth power socket,
do not
connect the equipment. In such cases you should consult your
workplace administrator or electrical maintenance staff to determine if a protective earth power socket is available.
A surge protected power outlet is strongly recommended as it provides some protection for the equipment
in areas of poor electrical quality as well as providing some protection against lightning strikes. The
equipment should be operated on a good, reliable supply of power at all times.
Note: The Immersion Heater Circulator should not be operated on the same electrical circuit as other high voltage
household appliances such as fridges, clothes dryers, washing machines or other continuous operation high voltage
devices. These types of devices can create power fluctuations that are undesirable for electrically sensitive
equipment. Consult your workplace administrator or electrical maintenance staff if you are unsure.
CAUTION
The Immersion Heater Circulator is intended for use with tap water or filtered water
only
. De-ionized or distilled
water can cause corrosion. Recommended water additives are outlined further in this User Manual. Use with any
other medium is not permitted.
The use of flammable liquids may cause serious injury or danger to life.
CAUTION
Always work above the level of the Immersion Heater Circulator to avoid spillage of dangerously hot water. At no
point should the user, operator, animal or any other perishable object be situated directly beneath the Immersion
Heater Circulator or water bath.
-
ALWAYS
wear protective eyewear when working with hot liquids.
-
ALWAYS
place the water bath on a strong, even, dry, flat waterproof surface which is made of inflammable
material. Placing the Immersion Heater Circulator on an unstable water bath could cause hot water to spill.
-
ALWAYS
turn off the mains power switch when the unit is not in operation and turn off the mains power
supply at the outlet.
-
ALWAYS
turn off the mains power switch and unplug the equipment from the mains power supply outlet
before emptying the water bath or moving the equipment.
-
ALWAYS
be careful of water condensation above or near the Immersion Heater Circulator and ensure at all
times that the condensation cannot come in contact with the Immersion Heater Circulator control panel or
mains power lead. Ensure benches are kept dry at all times.
-
ALWAYS
operate the Immersion Heater Circulator in a well ventilated area with adequate clearance around
the Immersion Heater Circulator as indicated.
-
ALWAYS
be careful of steam and avoid making contact.
-
NEVER operate the Immersion Heater Circulator without water in the water bath.
-
NEVER
empty the water bath while it contains hot water. Always allow the water to cool to ambient room
temperature before emptying.
-
NEVER
operate the equipment if you believe it is damaged in any way.
-
NEVER
operate the Immersion Heater Circulator if the mains power supply cable is damaged in any way
-
NEVER
use any sharp or metal objects near the Immersion Heater Circulator control panel.
-
NEVER
lift the Immersion Heater Circulator if you have an existing injury that impairs your ability to lift.
