嵌
入
式
蒸
氣
焗
爐
Built-in
Steam
Grill
Oven
– 24 –
Installation Method
First, lift up the appliance and put it inside the preserved area in the cabinet. (Pay attention
to the power plug location, such to connect the electricity after installation). Open the oven
door, tighten the 4 screws supplied to the 4 holes of the inner door frame. Make sure that the
appliance is fixed in place before connect to the electricity.
Notice for Installation
WARNING: The appliance must be grounded to avoid electric shock!
➢
Installation must comply with the prevailing standards and regulations and conducted
by qualified technicians.
➢
For cabinet installation, the material of the cabinet (plastic and molding wood) should be
heat-resistant bonding. Improper materials or bonding agent will lead to deformation
and incomplete adhesion.
➢
There should be enough space left for electrical connection of household appliance.
➢
The cabinet holding the appliance should be firm with enough supporting strength.
➢
Install the appliance firmly.
➢
The appliance could be installed in an in-line type cabinet or right under the top of
standard cabinet, given it is ventilated adequately.
➢
The length of power cord is around 1 meter, place the appliance near a power socket
within reach. Make sure the power of the appliance can be easily disconnect before
installation.
➢
Place the food tray, grill rack and oil tray into the shelf horizontally. Do not impede the
oven door close.
3. Cleaning and Maintenance
Regular inspection and maintenance could avoid machine failure, users are recommended to
check the following on a regular basis:
1. The appliance will still be hot after use. Wait until the appliance cool down before cleaning.
2. To ensure the appliance in good operation, always keep the door surfaces clean.Do not use
abrasive cleaners or sharpened metal blade to clean the glass of the oven door as they can
scratch the surface, and may cause the glass to break.
3. Shut down the appliance and unplug the power before cleaning the oven cavity.
4. Clean the oven cavity with wet cloth if food or soup is splashed on the interior surfaces.
It is not suggested to use hard material (e.g. metal brush and scouring pad) for cleaning.
Use soft and mild detergent if interior surface is too dirty while abrasive detergent is not
suggested.
5. Please use distilled water or purified water to operate. Using tap water for a long time
will produce water scale inside the cavity. Do not use mineral water, which speeds up the
formation of the scale.
