嵌
入
式
蒸
氣
焗
爐
Built-in
Steam
Grill
Oven
– 32 –
6.6 Function Setting
Example: Set Steam Grill cooking mode at 200°C for 40 minutes
Follow the below procedures to operate:
Cooking mode setting Cooking temperature setting Cooking time setting Operation starts
6.6.1 Cooking mode setting
Under selection mode, press [ ], [
] or [ ] button to select Steam Grill (
) cooking mode while (
)
icon blinks. Press [
] button to confirm and default cooking temperature will blink on display.
6.6.2 Cooking temperature setting
Press [
] or [ ] button to set desire cooking temperature (200°C in this case), press [
] button to confirm
and default cooking time will blink on display.
6.6.3 Cooking time setting
Press [
] or [ ] button to set desire cooking time (40 minutes in this case), press [
] button to confirm and
the operation will start.
6.6.4 Operation starts
During operation, cooking time will be show in descending order, and heating status indicator (
) will be shown
in ascending order according to the progress. When the appliance reaches set temperature, heating status indicator
(
) will show constantly.
6.7 Preset Timer setting
Example: The current time is 3:30 pm (15:30), set Convection cooking mode at 200°C for 30 minutes, then finish at
4:30 pm (16:30).
Follow the below procedures to operate:
Cooking mode setting Cooking temperature setting Cooking time setting Preset Completion time
Operation starts
6.7.1 Cooking mode setting
Under selection mode, press [ ], [ ] or [ ] button to select Convection ( ) cooking mode, ( ) indicator blinks.
Press [
] button to confirm and default cooking temperature will blink on display.
6.7.2 Cooking temperature setting
Press [ ] or [ ] button to set desire cooking temperature (200°C in this case), press [
] button to confirm
and default cooking time will blink on display.
6.7.3 Cooking time setting
Press [ ] or [ ] button to set desire cooking time (30 minutes in this case), press [
] button to preset Timer
function.
6.7.4 Preset completion time
To set the completion time, press [ ] or [ ] button to set hour digit (16 in this case). Press [
] button to
confirm switching to set minute digit by pressing [ ] or [ ] button (30 in this case). Then press [
] button
to confirm and the operation will start. Display shows current time with preset timer indicator ( ) blinks.
6.7.5 Operation starts
After setting completed, press [
] button once to check the starting time, (
) indicator will blink, while
press again to check the preset completion time, (
) will blink. Press [
] button one more time to check
the setting of Convection ( ) cooking mode. If the appliance is left idle for around 10 seconds during setting,
the appliance will turn back to setting completion interface. To cancel the preset function, switch off the appliance
directly.
