Mounting Water Solenoid Valve
1. Locate valve on a solid flat surface in an area
that is dry and well ventilated.
2. Mark and drill holes for water solenoid
mounting bracket.
NOTE: Hole size will depend on type of bolts/
screws used (1/4" [6mm] bolt/screws are
recommended).
3. Mount bracket.
4. Install fittings provided (#PLA14) on valve’s
inlet and outlet ports.
5. Attach valve to bracket. Valve must be
mounted according to flow markings on valve
body.
Mounting Vacuum Breaker
1. Install fittings as shown.
2. Locate mounting area that is a minimum of
six inches (15.24cm) above toilet.
3. Secure in a horizontal position.
INST
ALLA
TION
From
Pressurized
Freshwater
Source
PLA14
To Toilet
IN
OUT
Min. 6"
(15.24cm)
Ù
Ù
4
