Parts Included
Vacuum Breaker with fittings
Water Solenoid Valve with fittings
Water Solenoid Valve Mounting Bracket
Additional Parts Required
•
Two stainless steel toilet mounting bolts or
lag screws (1/4" [6mm])
•
3/4" (19mm) I.D. reinforced intake hose
•
3/4" (19mm) hose clamps
•
Wire
•
Terminals
•
Fuse/circuit breaker
Tools Required
•
Screw driver or nut driver (for hose clamps)
•
Hose cutter
•
Drill with bits (mounting the solenoid valve
and vacuum breaker)
•
Hole saw (routing the hose)
•
Screwdriver or wrench (mounting the
solenoid valve and vacuum breaker)
•
Wire cutters
•
Wire terminal crimpers
•
Tape measure
INST
ALLA
TION
3
Electrical
SPECIFICATIONS
Nominal Voltage (Volts DC)
Amperage Draw Nominal Voltage
Circuit Breaker/Fuse Size (Amps)
12
24
32
1
.5
.4
3
3
3
Wire Sizes
IMPORTANT: Wire sizes are for Intake Pump Branch circuit only.
NOTE: Recommended conductor sizes based on 105°C rated
insulation. All voltages use 18 AWG (1.0 mm
2
) wire for water solenoid
valve branch circuit.
Plumbing
Atmospheric Vacuum Breaker with fittings
Water Solenoid Valve with fittings
Operating Pressures
Minimum 5 psi (34 kPa)
Maximun 150 psi (1,034 kPa)
2"
(5.08cm)
5"
(12.70 cm)
4" (10.16cm)
2 1/4"
(5.72cm)
4 1/4" (10.80 cm)
7" (17.78 cm)
t
t
t
t
t
t
t
t
t
t
t
t
