·
AutoScan is suspended, if set.
·
MasterConsole II front panel buttons are disabled.
·
The
Selection Menu
is displayed.
See Figure 20 and
Figure 21
2.
The Selection Menu lists channels sorted either by Channel ID
or alphabetically by Name. Default sorting is by Channel ID.
Press
<F12>
to toggle.
·
The Selection Menu displays a maximum of eight
channels at a time.
·
The Status column shows each channel's activity and
Channel-Specific Scan Rate. A
“+”
in the base unit's
Selection Menu indicates the device is connected and
powered ON, while a
“–”
indicates the device is powered
OFF, or there is no device connected. A
“.”
in the Status
column of the second-tier Selection Menu indicates that
the status of the computer is undetermined.
Snn
indi-
cates the individual Scan Rate of nn seconds.
As the computer status changes (active/inactive), the
MCC updates the Status column periodically. To enable a
user to see the new status immediately, activate the OSUI
and press F8-Upgrade Computer Status. The MCC will
scan the channels and update the computer status and
then return to the previous menu.
·
For any inactive channel, the ID bar will display only the
channel ID and not the name field, when sorted by chan-
nel and will not display anything when sorted by name-
F12 toggle
The non-displayed names are still available in the MCC
internal database and can be edited with the F3 function.
3.
To select a computer:
·
Use the
<Page Up>
/
<Page Down>
or
<
Ï
>
/
<
Ð
>
keys to scroll
to the desired computer and press
<Enter>
;
OR
·
When the Selection Menu is sorted by
Channel ID
, press the
desired computer's
Key
number (in the left-hand column);
24
