Raritan Marine Elegance 241E, Инструкция по установке и обслуживанию

Страница: 6 / 12

6
L442 1221jlc
8
3
4
[222]
BOWL CENTER LINE.
ALIGN AT WALL.
CHECK
MEASUREMENT FOR
PROPER SCALE
7/32 [5.5]
NOMINAL
DRILL SIZE
HOLES FOR BOWL
MOUNTING BRACKETS
DISCHARGE HOSE
See #5 under Mounting
See #5 under
Mounting
WIRES
See #5 under
Mounting
INLET HOSE
IMPORTANT:
Holes for Wires and
Hoses are for F and R
Models through deck.
INCH [MM]
L500
Mounting Template
Model 2411
WALL
MARK HERE
HOLES FOR BOWL
MOUNTING BRACKETS
7/32 [5.5]
NOMINAL
DRILL SIZE
HOLES FOR BOWL
MOUNTING BRACKETS
BRACKET ALIGNMENT
LINES
FIG 3
FIG 4
FIG 5
FIG 6
2. Place Mounting Template on deck, against the
wall with arrow located on center mark and
secure with tape (FIG 3)
3. Drill holes for floor mounting brackets at
location (FIG 4)
4. Line up outside edges of floor mounting
brackets with adjacent lines on mounting
template. Secure brackets to deck using mount-
ing screws and flat washer (FIG 5)
7. Mount toilet to mounting bracket as shown in
FIG 6
5. Drill holes for discharge hose (2”(51 mm.) for
1 1/2” hose; 1 1/2”(38 mm) for 1” hose), inlet
hose (7/8” (22 mm.) and wires (3/4”(19 mm.)
Note: check outside diameter of the hoses and
adjust hole sizes accordingly.
6. Complete plumbing and wiring before
installing toilet.
MOUNTING