Raritan Marine Elegance 241E, Инструкция по установке и обслуживанию

Страница: 5 / 12

5
• 1” (25 mm.) or 1 1/2” (38 mm.) I.D. discharge hose
• 3/4” (19 mm.) I.D. reinforced intake hose
• 3/4” (19 mm.) and 1” (25 mm.) or 1 1/2” (38 mm.) hose
clamps (two for each connection below waterline)
• Wire
• Terminals
• Fuse/circuit breaker
Parts included with all models:
1. Toilet bowl assembly
2. Mounting bracket kit
3. Seat
4. Flush control - includes User and Installation guides.
(In some cases distribution points may package and
sell controls separately.)
5. User guide and Installation guide with labels
Additional Parts included with sea water model:
1. Remote pump assy.
2. Relay for remote pump (SeaFresh models only)
Additional Parts Required:
MOUNTING
Mounting Toilet
Mounting surface must be flat and solid.
Seat must open more than 90 degrees.
Discharge Hose Support Strap
Important:
Discharge Hose should be supported. Attach
support strap to seat bolt as shown in FIG 1.
For pressurized fresh water and remote intake pump
models, using through deck plumbing
Mounting toilet to deck
1. Mark deck and walls where center of bowl will be,
FIG 2
FIG 1
Installing the seat and discharge hose
support strapping
FIG 2
WALL
MARK HERE
L442 1221jlc