Raritan Dominion SX16, Инструкция по установке и эксплуатации, Страница: 49 / 162

C
HAPTER
4: C
ONSOLE
F
EATURES
35
•
Configuration Tabs : Displays several screens in which the user configures different elements of the
application
•
Configuration Save Commands : Used to save or ignore changes made to configuration
Configuration Lock and the Configuration Save Commands
Dominion SX is designed to allow only one user to configure it at any given time. When a user clicks on any of the
Configuration tabs, that user acquires the Configuration Lock, preventing others from modifying the configurations.
Other users may click on Configuration tabs at the same time, but will view all data in Read-only mode. Only after
the lock is released can another user modify configurations.
To Release the Configuration Lock:
•
Save the Configuration Changes : Saving the configuration commits the updated information to the unit and
automatically releases the Configuration Lock.
•
Reload the Previous Configuration : Reloading the previous configuration deletes all updated information,
reverts to the previously saved data, and automatically releases the Configuration Lock.
•
Unlock the Configuration : Clicking on the [Unlock Config] button located in the lower right corner of all
Configuration screens releases the Configuration Lock only if the user has not updated any configuration
changes. If any changes have been updated, only a Save or a Reload can unlock the configuration.
Note : Releasing the configuration lock loses any changes that are not updated.
Important! It is advisable to release the configuration lock once all necessary changes are made. This
leaves the configuration available in the event that other users have to make modifications to the device.
Update
Many of the Configuration tab screens feature an [ Update ] button. A user would click on the [ Update ] button to
notify the system that changes have been made in that Configuration screen. The configuration changes do not take
effect until they are saved. This offers two convenient advantages:
•
The user can make as many changes as intended in any number of tabs and just keep the changes updated. All
changes could be committed to take effect when desired with a single
Save operation.
•
The user can reject all changes made in a single session using the Reload option, offering a higher degree of
error tolerance for the system. Any accidental deletions or modifications could be rolled back without having to
log out of the unit.
Save and Reload
Users can apply configuration changes to the Dominion SX unit by clicking on the [ Save ] button after editing
Configuration screens. Users can reject all the configuration changes using the [ Reload ] button, but it is important to
remember that configuration changes cannot be reloaded once they are saved.
To Save Configuration Changes:
1. Click on the [ Configuration ] button in the left panel.
2. Click on the tab(s) for the screens in which you want to make configuration changes.
3. When the status bar displays the
Configuration locked message, other users cannot modify the unit’s
configuration.
4. Modify data in the screen and click on the [ Update ] button.
5. The status bar will display the message: Configuration changes not saved .
6. Click on the [ Save ] button.