Raritan Dominion SX16, Инструкция по установке и эксплуатации, Страница: 139 / 162

A
PPENDIX
I: TCL P
ROGRAMMING
G
UIDE
125
Generating a User Event
TCL scripts are a powerful tool for performing true device management, in the form of customer-defined monitoring
and notification of events. A sample script is shown below:
#This script performs the monitoring of HTTP servers.
proc pstat {procname port_num} {
set psef [concat "ps -ef | grep " $procname | grep -v "grep" | wc -l]
ampexec "stty -echo\r" 5 "#" $port_num
set output [ampexec "$psef\r" 10 "#" $port_num]
ampexec "stty echo\r" 5 "#" $port_num
return [lindex $output 0]
}
# add subscription to an event here.
ampaddsubscription event.user.httpProcess “xyz@xyz.com”
# Run through 4 different servers to find out if HTTP service is running
# on each one of them and trigger an event appropriately.
for {set port_num 0} {$port_num < 4} {incr po1} {
ampclear $port_num
amplock $port_num
set output [pstat httpd $port_num]
ampunlock $port_num
if {$output > 0} {
puts "HTTP_SERVER_OK $port_num"
amptriggerevent event.user.httpProcess “HTTP service is up and running on $port_num”
} else {
puts " HTTP_SERVER_ERROR $port_num"
amptriggerevent event.user.httpProcess “HTTP service down on $port_num”
}
}
In the Notification tab of the unit, the user can subscribe to either of the following:
event.user or event.user.httpProcess to get this message: “HTTP service is up and running on 1”. To subscribe to
user-defined events (defined in the TCL script), the event name must be specified.
Note: This Event Name must match EXACTLY with the event name the user generated using the
TCL script. event.user will send out an notification whenever this event is triggered.
event.user.httpProcess will be sent out only when this specific event occurs. The entry must be
entered in the notification tab exactly as it appears in the script.