Raritan Dominion SX16 Скачать руководство пользователя страница 157 | Manualshive

Страница: 157 / 162

Raritan Dominion SX16 Скачать руководство пользователя страница 157

A

PPENDIX

J: T

ROUBLESHOOTING

143

Port Access

P

ROBLEM

S

OLUTION

Port Access Refresh

The unit does not automatically refresh the Port Access List. It is refreshed only
when the user clicks on the [

Port Access

]

button, therefore, it is possible that a

user will have permissions revoked and these changes will not be visible on the
port access screen until the [

Port Access

] button is activated.

•

A window will appear indicating that permission is no longer allowed to
this port.

•

Whenever possible, it is recommended that Administrators not change port
access rights to a user who is already logged in to the unit.

Upgrade

P

ROBLEM

S

OLUTION

FTP - Server Unreachable

Should the FTP server specified in the upgrade panel be unreachable or incorrect,
the upgrade process will halt until a response is received from the FTP server or
until a timeout occurs.

•

Please wait and allow the FTP Server Unreachable message to appear.

FTP - File Not Found

The unit requires a package of upgrade files to be in the directory specified by the
upgrade path. This package must have all included files and an

upgrade.cnf

file.

Should this file not exist, or if the contents of the file are not in the indicated
places, the File Not Found message will appear.

•

Verify that the upgrade package is in the correct directory and confirm the
upgrade path and IP address of the FTP server.

•

If the upgrade still fails, reinstall the upgrade package and begin again.

Modem

P

ROBLEM

S

OLUTION

Login Failure

The unit supports Web-browser access through the modem at connection speeds
of 28.8K bps or greater. Should the baud rate be insufficient, the user will be
unable to log on to the unit via the modem.

•

28.8K bps minimum connection speed is required for browser-based
modem authentications (login).

«
...
155
156
157
158
159
...
»

Содержание Dominion SX16



































































































































































Отзывы:

Нет отзывов