Raritan Dominion SX16, Инструкция по установке и эксплуатации, Страница: 111 / 162

A
PPENDIX
E: C
ONFIGURING
C
ISCO
ACS RADIUS S
ERVER
97
Appendix E: Configuring Cisco ACS RADIUS Server
Use the following procedure to configure the Cisco RADIUS server so that you can work with Dominion SX. It is
assumed here that Administrators are familiar with setting up and configuring the RADIUS server. In order for
Dominion SX to support RADIUS, both the unit and the user information must be added into the RADIUS
configuration.
Only Version 3.0 has been validated; however, other versions of the RADIUS server should operate with the unit.
Only the user’s role can be controlled on the unit using the RADIUS (IETF) option.
Note : Access restrictions to specific ports on the unit cannot be controlled.
1. Log on to Cisco ACS Server using the browser.
Figure 91 Cisco ACS Main Display
2. Click on the [ Network Configuration ] button in the left panel of the screen and select Add Entry to add/edit
AAA Client. This must be done for each unit that is going to accessed via RADIUS. Click on the Authenticate
Using drop-down menu and select RADIUS (IETF) from this list. Click on the [ Submit ] button.
Figure 92 Unit Configuration Display