safety notes
RIsK OF ElECTRIC sHOCK!
DO nOT OPEn. nO UsER sERvICEAblE PARTs InsIDE
•
Before using, always visually inspect the unit to see that the cables and connectors are not worn or
damaged. Replace the damaged part before welding.
•
Switch off and remove the plug from the mains before adjusting, cleaning, or if the cables are
entangled and before leaving the equipment unattended for any period.
•
To avoid damaging the unit, do not interrupt the supply voltage or disconnect the welding cable,
while the unit is welding a fitting.
•
Do not lift or pull the equipment by its cables.
•
Do not disconnect the welding cables by pulling on them; always pull off the connectors from
the fitting.
•
Do not start a weld without the pipe correctly inserted into the fitting.
•
Do not touch the fitting while welding.
•
Do not weld in the rain or leave the equipment outdoors while it is raining.
•
Weld only in daylight or in good artificial light
•
The operator is responsible for accidents or hazards occurring to other people or their property while
using this equipment.
•
Keep your work area safe!
•
Keep bystanders a safe distance away from the machine while welding.
•
Never allow people unfamiliar with these instructions to use the welding unit
RIsK OF EXPlOsIOn!
THIs WElDIng UnIT MUsT nOT bE UsED In A gAsEOUs ATMOsPHERE.
2
