NINOX 640 SU/USER MANUAL/01-21/REV1.0
9.3 Trigger Mode
The trigger mode of the camera and additional trigger controls can be controlled from the
“Trigger”
tab in the GUI, shown in Figure 11.
The trigger mode of the camera can be toggled from the
“Readout Mode”
dropdown box. By
default, the camera will be set to internal trigger. This mode is indicated by the
“Live”
option
in the dropdown box.
The camera can be switched to external trigger mode by selecting the
“Ext. Triggered”
option. When this mode is enabled, the
“Trigger Polarity”
(rising or falling edge) dropdown
input box will become available. By default, the camera will run with a rising edge trigger
polarity. A trigger delay can also be set when external trigger mode is enabled.
Figure 11: Trigger Mode.
