4
Installing the DC Jack to the Faceplate
The DC jack snaps into the faceplate. If it is pre-installed, do not attempt to remove it – you risk
cracking the faceplate by doing so. The DC jack mounting hole is ‘D’ shaped. Ensure the flat edge of the
DC jack matches up with the flat edge of the mounting hole. Once you have lined up the flat edges,
gently press the jack into the hole until it snaps into place.
Wiring Diagram
Alignment Holes
Alignment Tab
Mounting Hole – Note ‘D’ shape
Mounted DC Jack
DC Jack +
(center terminal)
DC Jack -
+ from DC Jack
- from DC Jack
to DIM + on driver
+ from DC Jack
to DIM + on driver
- from DC Jack
To DIM – on driver
To DIM – on driver
