Quick Start
4. Preparations, Operating Mode & Start
•
•
•
•
•
•
•
•
•
Put on protective gloves.
Open the cleaning liquid container.
(See the handling of the container on page 4.)
Place two bottles of the same cleaning medium
in the cleaning liquid container:
XXX
- Slide the container onto the RFID reader of
XXX-
the machine. (Fig. 1)
XXX
- Unscrew both caps of the bottles and place
XXX-
them in the storage location.
XXX
- Insert a bottle in the rear position.
XXX-
Pay attention to the positioning arrows.
XXX
- Insert the second bottle in the front position.
XXX-
(Fig. 2)
Close the container and connect it to the
washing device. The coupling must click in
audibly. (Fig. 3)
Open the drawer and place the parts to be
washed in the inner container. (Fig. 4)
(See the general information on page 1.)
Close the drawer.
Select the operating mode by choosing either a
job, material or customer setting (if available).
Press the start button to start the process.
Wait until all process steps are finished. (Fig. 5)
After cleaning process is finished, check the
components for cleaning result. (Fig. 6)
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
CLICK!
Jobs
Material
Custom
D10+ capsule
2019-04-05 11:00 Upper Jaw Patient 1
D10+ capsule
2019-04-05 10:45 Upper Jaw Patient 2
D10+ capsule
2019-04-05 10:25 Upper Jaw Patient 3
Jobs
Material
Custom
D10+ capsule
2019-04-05 11:00 Upper Jaw Patient 1
D10+ capsule
2019-04-05 10:45 Upper Jaw Patient 2
D10+ capsule
2019-04-05 10:25 Upper Jaw Patient 3
3
