Cleaning Liquid Container
5. Handling of Cleaning Liquid Container
•
•
•
•
•
•
•
•
•
Put on protective gloves.
Press the quick coupling release button located
behind the cleaning liquid container and
disconnect the container from the unit. Take
care, cleaning medium may drip out of the
coupling.
Hold the container‘s upper part with one hand.
With the other hand, reach into the opening slot
of the RFID reader. (Fig. 1)
Press and hold the inner locking plate of the
container through the hole with your thumb.
Tilt the container‘s upper part a few centimetres
to the right. (Fig. 2)
Now, release the thumb and lift the upper part to
the left, so that the upper part is levelled out.
(Fig. 3)
Lift the upper part off the lower part. (Fig. 4)
Just before the metal tube ends have completely
been removed from the bottles, ensure that any
residual cleaning medium in the tubes flowed
back into the bottles. Hold the upper part at a
slight angle for this. (Fig. 5)
Place the upper part upside down on a paper
towel. The tube ends now point into the air.
(Fig. 6)
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
4
