RAPIBREW FREDDA 1.0, Руководство по обслуживанию, Страница: 66 / 67

62
• Route the (B) middle console sensor cable (labeled “Tcup”) and (C) top lift sensor
board cable (labeled “TLIFT”) through the opening in the center of the machine’s
middle column.
• Route the (D) bottom lift sensor cable (labeled “BLIFT”) and (E) lower pot sensor
cable (labeled “BcuP”) through the routing channel and then through the opening
in the center of the machine’s middle column. Afterwards, route the bottom lift
sensor cable into the middle console, and the lower pot sensor cable into the base
of the machine.
B C
E
D
E D