19
14
20
16
21
22
23
17
12
13
18
After logging in, you will see the web page below, click on the “AP”
button to start setup.
5.
6.
Wizard
Internet
WiFi AP/Router
User-PC
Repeater
Device Information
SSID
Channel
Security
Password
Save/Reload Setting
Upgrade Firmware
Reboot Device
RANGEXTD
AUTO
NONE
192.168.7.234
192.168.7.1
Enable
IP Adress
Gateway
DHCP
Firmware Version
UpTime
Build Time
WR18_V110.
0 Day, 00:01:28
2020-12-03 18:38
AP Mode
Wireless
LAN
Management
Status
Password
The following message will be displayed on your web browser:
Enter the device wireless parameter. It’s recommended that you
rename an SSID, choose an Authentication Mode and create a
WiFi Password.
SSID
Authentication
Mode
Password
Create the wireless SSID/Name of the device
Setup the wireless security and encryption to
prevent unauthorized access and monitoring.
Supports WPA, WPA2, WPA/WPA2 encryption
methods.
Create a password for the device
Click on “
Apply”
button, the device will restart.
After the reboot has been completed, please use your smart device’s
(smartphone/tablet/computer/laptop etc) WLAN setting to connect to new WiFi
SSID that you created.
To restore factory default settings, press and hold the RESET pinhole button
for 10 seconds and then release, the indicators will all turn off. After you reset
your device, unplug the it for 3 seconds. Plug it back in and wait about 30
seconds, then check your WiFi network for the network called ‘RANGEXTD’
on your computer or mobile device.
*If your device is already configured to your network, you cannot access the
default IP address (
192.168.7.234
). You must reset the device to access
again.
To restore factory default settings, press and hold the RESET pinhole button
for 10 seconds and then release, the indicators will all turn off. After you reset
your device, unplug the it for 3 seconds. Plug it back in and wait about 30
seconds, then check your WiFi network for the network called “RANGEXTD”
on your computer or mobile device.
*If your device is already configured to your network, you cannot access the
default IP address (
192.168.7.234
). You must reset the device to access
again.
The device is connected to a DSL or cable
modem and works as a regular wireless
router. Internet access from DSL or cable
modem is available for one user but more
users need to share the Internet.
CONFIGURING THE WIFI ROUTER MODE
WAN
ADSL
7.
8*.
9*.
7*.
LOGIN
English
Password
LOGIN
English
Password
After logging in, you will see the web page below, click on the “Router”
button to start setup.
6.
Wizard
Internet
WiFi AP/Router
User-PC
Repeater
Device Information
SSID
Channel
Security
Password
Save/Reload Setting
Upgrade Firmware
Reboot Device
RANGEXTD
AUTO
NONE
192.168.7.234
192.168.7.1
Enable
IP Adress
Gateway
DHCP
Firmware Version
UpTime
Build Time
WR18_V110.
0 Day, 00:01:28
2020-12-03 18:38
Router Mode
Wireless
LAN
Management
Status
1.
2.
3.
4.
5.
The mode selector must be set to the “Router” position for Router
Mode.
Plug the Device into a wall socket.
Connect your DSL Modem with the Device with RJ45 Cable.
When connected, open your web browser and type
192.168.7.234
in
the browser address box. This number is the default IP address for
this device.
The login screen below will appear. Enter the default password
“admin”
and then click
‘Login’
.
Choose your WAN connection type.
If
PPPoE
(ADSL Dial-up) is selected, please enter the Account and
Password from your ISP, these fields are case-sensitive.
Enter the device wireless parameter. It’s recommended that you
rename an
SSID
, choose an
Authentication Mode
and create a
WiFi
Password
. Click “
Apply
” button, it will restart. Wait for a few seconds
the Device is ready for use.
If Static IP is selected, please enter the
IP Address, Subnet Mask,
Default Gateway
, DNS, etc.
Enter the device wireless parameter. It’s recommended that you
rename an
SSID
, choose an
Authentication Mode
and create a
WiFi Password
. Click “
Apply
” button, it will restart. Wait for a few
seconds the Device is ready for use.
Click on “
Apply”
button, the device will restart.
After the reboot has been completed, please use your smart device’s
(smartphone/tablet/computer/laptop etc) WLAN setting to connect to
new WiFi SSID that you created.
Choose your WAN Connection Type.
To change password, please follow the
following instructions:
Please click “
Password
” button on the
management setting interface, the following
message will be displayed on your web
browser:
Click “
Apply
” button, the Device will log off.
If you forgot your existing password, you can reset the password by clicking the
reset pinhole button
on the side of the device for 10 seconds and then release,
the indicators will all turn off. After you reset your device, unplug the it for 3
seconds. Plug it back in and wait about 30 seconds, then check your WiFi
network for the network called ‘RANGEXTD’ on your computer or mobile device.
Default password of the device is “admin”, and
it’s displayed on the login prompt when
accessed from web browser. There’s a
security risk if you don’t change the default
password, since everyone can see it. This is
very important when you have the wireless
function enabled.
Change Management Password
Firmware Upgrade
If PPPOE is selected, please
follow steps 7* to 9*.
Wizard
Internet
WiFi AP/Router
User-PC
Repeater
Device Information
SSID
Channel
Security
Password
Save/Reload Setting
Upgrade Firmware
Reboot Device
RANGEXTD
AUTO
NONE
192.168.7.234
192.168.7.1
Enable
IP Adress
Gateway
DHCP
Firmware Version
UpTime
Build Time
WR18_V110.
0 Day, 00:01:28
2020-12-03 18:38
Repeater Mode
Wireless
LAN
Management
Status
Wizard
Internet
WiFi AP/Router
User-PC
Repeater
Device Information
SSID
Channel
Security
Password
Save/Reload Setting
Upgrade Firmware
Reboot Device
RANGEXTD
AUTO
NONE
192.168.7.234
192.168.7.1
Enable
IP Adress
Gateway
DHCP
Firmware Version
UpTime
Build Time
WR18_V110.
0 Day, 00:01:28
2020-12-03 18:38
Repeater Mode
Wireless
LAN
Management
Status
The system software used by this router is
called
“Firmware”
, just like any applications
on your computer, when you replace the old
application with a new one, your computer will
be equipped with new functions. You can also
use this firmware upgrade function to add new
functions to your router, even fix the bugs of
this router.
Please click
“Upgrade Firmware”
located at
the management setting interface, and then
the following message will be displayed on
your web browser:
Click
“
Browse...
”
or
“
Choose File
”
button first; you’ll be prompted to provide the
filename of firmware upgrade file. Please download the latest firmware file from
our website, and use it to upgrade your router.
After a firmware upgrade file is selected, click
“
Upload
”
button, and the device
will start firmware upgrade procedure automatically.
The procedure may take serveral minutes, please be patient.
Never interrupt the upgrade procedure by closing the web browser or physically disconnect your
computer from the device. If the firmware you uploaded is interrupted, the firmware upgrade will fail,
contact customer support for assistance if needed.
Warranty is void if you interrupted the upgrade procedure.
Wizard
Internet
WiFi AP/Router
User-PC
Repeater
Device Information
SSID
Channel
Security
Password
Save/Reload Setting
Upgrade Firmware
Reboot Device
RANGEXTD
AUTO
NONE
192.168.7.234
192.168.7.1
Enable
IP Adress
Gateway
DHCP
Firmware Version
UpTime
Build Time
WR18_V110.
0 Day, 00:01:28
2020-12-03 18:38
Repeater Mode
Wireless
LAN
Management
Status
Wizard
Internet
WiFi AP/Router
User-PC
Repeater
Device Information
SSID
Channel
Security
Password
Save/Reload Setting
Upgrade Firmware
Reboot Device
RANGEXTD
AUTO
NONE
192.168.7.234
192.168.7.1
Enable
IP Adress
Gateway
DHCP
Firmware Version
UpTime
Build Time
WR18_V110.
0 Day, 00:01:28
2020-12-03 18:38
Repeater Mode
Wireless
LAN
Management
Status
Connect to a network by right-clicking the
network icon ( or ) in the notification area.
How to Connect your Computer/Laptop with the Device
1.
2.
Choose the wireless network from the list
that appears, and then click
Connect.
3.
Type the network security key or passphrase
if you are asked to do so, and then click
OK
.
You’ll see a confirmation message when you
are connected to the network.
4.
5.
Log on to the computer.
To confirm that you added the computer, please do the following:
Open network by clicking the
Start
button , and then clicking
Control
Panel
. In the search box, type
network
, and then, under Network and
Sharing Center, click
View network computers and devices
. You should
see icons for the computer you added and for the other computers and
devices that are part of the network.
Note:
If you don’t see icons in the Network folder, then network discovery and file sharing might be
turned off.
Adding a wireless computer to the device
At the end of its serviceable life, this product should not be treated as
household or general waste. It should be handed over to the applicable
collection point for the recycling of electrical and electronic equipment,
or returned to the supplier for disposal.
Difficulties with setting up your Device?
We are here to help!
Please visit
https://support.myrangextd.com/
or
scan the QR code for any urgent inquiries!
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any inte rference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator and your body.
Canada EMC statement
This device complies with RSS 210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
This Class [B] digital apparatus complies with Canadian ICES-003.
This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This equipment
should be installed and operated with a minimum distance of 20cm
（
may be adjusted according to actual calculation
result
）
between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCCID NO: 2AVK9-30251
WEEE Directive & Product Disposal
If DHCP is selected, please
follow step 7.
The mode selector must be set to the
“AP”
position for Access Point
Mode.
Plug the device into a wall socket. Turn on device. Connect your
router with the Device with RJ45 cable.
When connected, open your web browser and enter
192.168.7.234
in the browser address box. This number is the default IP address for
this device.
The login screen below will appear. Enter the default password
“admin”
and then click
“Login”
.
1.
2.
3.
4.
STEPS
STEPS
SSID
Authentication
Mode
Password
Create the wireless SSID/Name of the device
Create a password for the device
SSID
Authentication
Mode
Password
Create the wireless SSID/Name of the device
Setup the wireless security and encryption to
prevent unauthorized access and monitoring.
Supports WPA, WPA2, WPA/WPA2 encryption
methods.
Create a password for the device
•
•
Note:
Setup the wireless security and encryption to
prevent unauthorized access and monitoring.
Supports WPA, WPA2, WPA/WPA2 encryption
methods.
Resetting RANGEXTD
Scan the below QR code for video instructions.
Resetting RANGEXTD
Scan the below QR code for video instructions.
placeholder only
placeholder only
placeholder only
placeholder only
placeholder only
placeholder only
placeholder only
placeholder only
placeholder only
placeholder only
placeholder only
placeholder only
placeholder only
placeholder only
Scan the below QR code for MAC set up
尺寸: 100 x 92mm
105銅版紙彩色, 風琴折疊
BACK SIDE
PROPERTY OF DFO GLOBAL
VER 2.0 Jan 05, 2021
RangeXTD WiFi Extender IM
CONFIDENTIAL DOCUMENT
