Rangevision NEO, Настройка и калибровка

Страница: 12 / 15

2. In accordance with the text prompt and symbol image install the calibration plate
in the desired position. The brightness of the images of calibration plate can be
adjusted with exposure slider. You should not allow very dark images or images
with excessive brightness areas. Press the Capture button. Original plate position -
the position at the working distance from the scanner (marking on the view from
cameras matches the markers on the plate), the cross is projected on the central
marker.
3. If the plate placement is incorrect, an error message will appear. Correct the
placement and repeat the step.
In case if not all marks are found on the image, you will also see the error
message. It may mean the following:
● not all markers are visible on one of the snapshots,
●
not all markers are lit by the projector,
● calibration plate is placed at large angle to the scanner,
●
plate is too close or too far from the scanner - the image is not sharp,
● the plate is damaged or dirty.
Correct all deficiencies and press Capture .
12