Ranger R30XLT, Инструкция по установке и эксплуатации

Страница: 19 / 48

19
7. Insert the smooth curved end of Bead Lifting Tool over
the right end knob of the mount/demount head and below
the top bead of the tire. (See Fig 11.17)
8. Push the Bead Lifting Tool down toward the wheel to lift
the tire bead up and over the “duckbill” of the demount head.
Hold the Bead Lifting Tool in this position. (See Fig 11.18)
9. Depress the Table Top Foot Pedal to rotate the wheel
clockwise. (See Fig 11.19)
10. Hold the Bead Lifting Tool down until the upper bead is
solidly above the rim. Continue rotating the wheel clockwise
until the upper bead is completely demounted. (See Fig
11.20 - 11.22)
11. Liberally lubricate the lower bead again, if there was any
difficulty lubricating the lower bead earlier. (See Fig 11.23)
Fig. 11.17
Fig 11.18
Fig 11.19
Fig 11.20
Fig 11.21
Fig 11.22
Fig 11.23