Ranger Products RL-8500, Инструкция по установке и эксплуатации

Страница: 31 / 54

31
ENSURE THAT THE CUTTING TIP IS CLEAR OF
THE DRUM PRIOR TO TURNING ON THE SPINDLE
MOTOR.
MAKE SURE THE DRUM / ROTOR CROSS FEED
SWITCH IS IN THE NEUTRAL POSITION.
KEEP HANDS clear of moving parts at all times. Keep
hair, loose clothing, neckties, shop rags, jewelry, fingers,
and all parts of body away from moving parts.
Always wear safety glasses or a face shield.
Cutting an exposed surface such as a brake drum, rotor
or flywheel will produce flying chips and debris.
14. Move the Feed Selector Switch to the Neutral
position.
15. Set the Speed Feed Dial to 0.
16. Turn on the Main Power Switch.
17. Rotate the Cross Feed Hand Wheel counter clock
wise until the Cutter begins to cut a shallow scratch cut in
the drum.
18. Back of the Cutter by turning the Cross Feed Hand
Wheel Clock wise.
19. Turn off the Main Spindle Power.
20. Examine the scratch cut making sure it is uniform
around the entire circumference of the drum. If the scratch
cut appears to be deeper on one side of the drum and not
a uniform depth, remove the drum from the arbor, check
the mounting adapters and arbor for nicks, burrs, or chips,
remount the drum, and repeat the process.
Once the drum is determined to be mounted properly
and the scratch cut is good, continue on to Machining the
Drum in Step 14.