Ranger Products RL-8500, Инструкция по установке и эксплуатации

Страница: 20 / 54

20
STEP 7
(Mounting The Rotor)
For most applications the Quick Change Adapter Plus
should be in place for turning rotors.
Mount the Twin Cutting Head as Shown in Step 2.
1. Make sure the Twin Head Cutting Tips will clear of the
edge of rotor face.
2. Loosen the Cross Feed Locking Nut.
3. Loosen the Cross Feed Handle Lock Knob.
4. Turn the Cross Feed Hand Wheel counter clock wise
until the Cutting tips are clear of the edge of the rotor you
will be turning.
5. Wipe any debris from the locator and arbor.
6. Ensure the Rotor is free from debris.
7. Mount the Rotor onto the arbor.
8. Mount the Centering Cone.
9. Hand tighten the locking nut against the Cone.
(reverse threaded).
10. Firmly tighten the Locking Nut with the Spanner
Wrench (reverse threaded).
11. Mount the Silencer Band and double check
making sure the Silencer Band is centered on the rotor
and securely fastened.
You are now ready to check the rotor mounting and make
a scratch cut.