Rangemaster GEO, Инструкции по установке и информация по уходу

Страница: 25 / 32

23
Due to our policy of continual improvement, we reserve the right to change specifications without prior notice.
Key QTY Description
A13 1 ½” BSPF x ¼” push fit
A14
1 ¼” tube (drain)
B1
1 1 ½” x 3” Waste extension piece (for use with one bowl sinks only)
B2 1 1 ½” x 1 ½” x 22mm Waste tee
B3 1 22mm Olive
B4
1 Plastic compression nut
B5
0 22mm copper pipe with elbow, installer fabricated to suit.
B6 1 Plastic compression nut
B7 1 22mm Olive
B8
1 ½” x 22mm Tundish
B9
1 ½” x ½” Vent hose
C1 1 ¾” BSP x 3/8” push fit
C2 1 3/8” x 600mm tube (thicker tube type)
C3
1 Filter head (including check valve)
C4
1 Flush / Drain pipe
C5 1 Filter cartridge
C6 2 Filter head screws
C7
1 3/8” stem x ¼” push fit
C8
1 ¼” x 1500mm Tube (thinner tube type)
C9 1 ¼” x ¼” x ¼” Push fit equal tee
C10 Part of C8 ¼” x 1500mm Tube (cut to length as required from C8)
C11
Part of C8 ¼” x 1500mm Tube (cut to length as required from C8)
C12
1 ¼” NPTF x ¼” Push fit connector
C13 1 ¾ BSPF x ¼”” push fit
D1 0 15mm copper pipe
D2
1 15mm Compression nut
D3
1 15mm Compression olive
E1 0 15mm copper pipe
E2 1 15mm Compression nut
E3
1 15mm Compression olive
E4
1 ½” (15mm) x ½” (15mm) x ¾” 3 way isolating tee
E5 1 15mm Compression olive
E6 1 15mm Compression nut
E7
0 15mm copper pipe
E8
1 15mm Compression nut
E9 1 15mm Compression olive