Rangemaster GEO, Инструкции по установке и информация по уходу

Страница: 22 / 32

20
Due to our policy of continual improvement, we reserve the right to change specifications without prior notice.
10. Specifications
Functionality
4 way mixer tap:
Cold (unfiltered) water*
Cold (filtered) water*
Hot (domestic) water*
Hot (80-98°C) water
*via a common pathway
Safety features
1.
Water temperature limited to a maximum of 98°C
2. Removable child safe ‘HotFob’ to dispense hot water
3.
Thermally insulated exterior surface
4. Constant flow rate of hot water, reduced spitting & steaming in use
Min. domestic hot water pressure
Varies by model, refer to tap installation instructions
Min. cold water pressure required
Varies by model, refer to tap installation instructions
Maximum water pressure 5.5 bar
Spout rotation angle 360° (freely rotating)
Tap hole diameter(s)
35mm +/-1mm
Tap hole thickness
0-40mm
Nominal mixed flow rate at 3 bar
Varies by model, refer to tap
specifications
Note: inlet flow limiters are available
separately to flow limit the tap if required
to meet varying building standards.
For further detailed information refer to the tap specification for the model in question.
Exterior dimensions 175mm (w) x 400mm (d) x 410mm (h)
Product weight Apx. 8 kg (when empty) / 12.5 (when filled)
Heat up time (minutes)
+10 °C to +99 °C: in approx. 15 min
Supply Voltage Range
220-240V
Power (W) @ 230V 2760W
Frequency (Hz) 50Hz
Minimum cold water pressure required
2.0 bar
Maximum cold water pressure
8 bar
Maximum chlorine value 100mg/l
Tank material 304 stainless steel
Tank draw off volume
Maximum single continuous draw off is 3.5 litres
Recovery rate
Maximum of 13.5 litres per hour at 98°C
Temperature variability 80-98°C (in tank temperature)
Safety vent devices Vent and tundish supplied in line with Part G building regulations
Boiler type
Vented (unpressurised) pumped system
Ambient operating temperature
+5°C to +40°C (indoor use only)
Mixer Tap
Boiler