Range Road RR560, Руководство оператора

Страница: 16 / 24

Replacing Drive Belt
Remove the belt cover for gearbox puiley.
Loosen the two bolts M8X25 and one bolt
M8X30 that fix the two belt blockers, no
need to remove them. Pull out the belt.
Lubrication
General Lubrication
Lightly lubricate all moving parts of the
machine at end of the season or every 25
operating hours.
M6×20
M8×16
Belt Cover
Belt Cover for Gearbox Pulley
M8×20
M8×25
M8 × 25
M8 × 25
M8 × 30
Drive Belt
Gearbox Pulley
You may need to loosen the belt
guide bracket and slide back before
removing belt.
MINI TRACKED DUMPER
16
GB
Gearbox Lubrication
The gearbox is pre-lubricated and sealed at the
factory. Unless there is evidence of leakage or
service has been performed on the gearbox, no
additional lubricate should be required until 50
hours use.
After first 50 hours use, change all the gear oil.
Capacity is 1.5L.
For future use, check the oil level after every
50 hours of use. If you remove the oil level plug
and no oil flows out, please add oil and then
screw the oil level plug.
Gear oil GL-5 or GL-6, SAE80W-90 is
recommended. Do not use synthetic oil.
When replacing gear oil, the engine must be
stopped and still warm. Unscrew the filter cap
and the drain plug. When oil is drained, replace
the drain plug, fill up with fresh oil, and then
replace the filter cap.
Oil Filler
Oil Outlet