Range Road RR560, Руководство оператора

Страница: 18 / 24

4. Remove the two M10 nuts and washers from
the side of track protection guard and take
off the track protection guard.
5. Loosen the adjusting bolts and pull the
steering wheel axle toward the engine, then
track will be loosen.
Replacing Tracks
Check the condition of the tracks periodically.
If any track is cracked or frayed, it should be
replaced as soon as convenient.
1. Lift up the hopper and insert a support rod
for safety purposes.
2. Lift the machine and set it on blocks or
supports rated for the weight of the machine
so that the tracks are approximately 10 cm
off the ground.
3. Remove the three M8 × 16 bolts and washers
that fix the track protection guard.
Steering Wheel Axle
Steering Wheel
Track Protection Guard
Adjusting Bolt
MINI TRACKED DUMPER
18
GB
6. Remove the M10 × 60 bolt, washers and nut
from the driving wheel.
7. Pull out the whole track with driving wheel.
Support Object
Danger Area
M8
×
16