Range Road Enterprises Ltd
Box 5 Site 9 RR1
Lacombe, AB T4L 2N1
www.range-road.ca
Your risk from these exposures varies, depending on how often you do this type of work. To
reduce your exposure to these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are specially designed to filter out
microscopic particles. (California Health & Safety Code § 25249.5, et seq.)
18.This product contains or, when used, produces a chemical known to the State of California to cause
cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5,
et seq.)
19.When spills of fuel or oil occur, they must be cleaned up immediately. Dispose of fluids and
cleaning materials as per any local, state or federal codes and regulations. Store oil rags in a
bottom-ventilated, covered, metal container.
20.Keep hands and feet away from moving parts. Do not reach over or across equipment while
operating.
21. Before use, check for misalignment or binding of moving parts, breakage of parts, and any other
condition that my affect the equipment’s operation. If damaged, have the equipment serviced
before using. Many accidents are caused by poorly maintained equipment.
22.Use the correct equipment for the application. Do not modify the equipment and do not use the
equipment for a purpose for which it is not intended.
Service Precautions
•
Before servicing, maintenance or cleaning:
-
Turn the engine switch/key to its “OFF” position.
-
Allow the engine components to completely cool
•
Always keep all safety guards in place and in proper working order. Safety guards can include
muffler, air cleaner, mechanical guards and heat shields, among other guards.
•
Wear approved safety goggles, heavy-duty gloves, and a dust mask/respirator during service.
•
Maintain all labels on the saw mill. These show important information. If unreadable, missing or
damaged, contact Range Road for a replacement.
•
Have the equipment serviced by a qualified repair person using only OEM replacement parts. This
will ensure that the safety of the saw mill is maintained. Do not attempt any service or maintenance
procedures not explained in this manual or any procedures that you are uncertain of your ability
to perform in a safe or correct manner.
•
Store all equipment out of the reach of children.
•
Follow scheduled engine and equipment maintenance.
•
Refueling:
-
Do not smoke, or allow sparks, flames, or other sources of ignition around the equipment,
especially when refueling.
-
Do not refill the fuel tank while the engine is running or hot.