7
Bluetooth
®
In addition to the six audio inputs on the rear panel, you can send an audio signal wirelessly
through Zonetech to any zone using Bluetooth. This signal uses its own input channel.
IMPORTANT:
Bluetooth and WiFi may not both be in use at the same time. When Bluetooth is
enabled, WiFi will be disabled.
To pair
/
connect your Bluetooth device to Zonetech
:
1.
On Zonetech, press the
Stream
button to access the Stream settings.
2.
Use the
Left
/
Right
(
/
) buttons to select the
Stream Source
(
Source
) setting. Then,
turn the
Info
knob to select the
Bluetooth
option.
3.
Use the
Left
/
Right
(
/
) buttons to select the
Bluetooth Pairing
(
Pairing
) setting. Then,
turn the
Info
knob to select
Enabled
. Zonetech's
Stream Light
will begin flashing.
4.
On your Bluetooth device, enter its Bluetooth settings, find
Zonetech
and connect to it.
The
Stream
Light
will be solid blue when it is connected.
Notes
:
•
If your device requires a passcode or PIN, enter
0000
.
•
If your Bluetooth device is not able to connect to Zonetech, set the
Stream Source
(Source) to
None
to disconnect previous Bluetooth connections, and try the above steps
again.
•
If you experience trouble connecting or playing music, make sure your Bluetooth device’s
operating system is up to date.
To unpair
/
disconnect your Bluetooth device from Zonetech
, set the
Stream Source
(
Source
) setting to
None
. Zonetech will disconnect from your Bluetooth device. Alternatively,
disconnect using the Bluetooth settings on your device.
To stream the Bluetooth audio signal to an output on Zonetech
:
1.
On Zonetech, press the
Stream
button to
access the Stream settings.
2.
Follow the directions
to pair your
Bluetooth device to Zonetech.
3.
Press and release the
Zone
button (
1
–
6
) for the
zone where you want to send the Bluetooth
audio signal.
4.
Use the
Left
/
Right
(
/
) buttons to select the
Input Source
(
In Source
) setting.
5.
Turn the
Info
knob to select the
Stream
option. That zone is now receiving the audio
signal from your Bluetooth device.
